Skip to main content

Plumbing installation and renovation in Boucherville and on the South Shore

New fixtures, piping and larger-scale renovation work.

A plumbing installation is judged years later. An accessible fitting, correct slope, proper venting and a shut-off valve in the right place are invisible once the walls are closed — but they are what separates an installation you forget about from one that comes back to haunt you.

Plomberie Boucherville handles both fixture installations and larger-scale renovation work.

Work is carried out to the Québec Construction Code by a contractor holding RBQ licence 5825-6405-01.

Does this sound familiar?

  • You are renovating a bathroom or kitchen
  • A fixture needs installing or relocating
  • Original piping needs replacing
  • A new water point needs adding
  • A fixture is missing a shut-off valve
  • A larger project requires a licensed plumber

How we work

  1. Understand the project

    We confirm what is possible with the existing system, and what would require more substantial changes.

  2. A clear quote

    You receive a quote setting out the planned work before anything begins.

  3. Compliant execution

    The installation is carried out to the Québec Construction Code, then tested before being returned to service.

Get a quote

Describe your project and we will come back to you with next steps.

Work we have carried out

Photographs from our project gallery.

  • New ABS drain and trap under a kitchen sink, with copper supply lines fitted with shut-off valves.
  • Brushed stainless-steel pull-down kitchen faucet over a double sink.
  • Smart toilet with a bidet seat and remote control, connected to the water supply through a tee fitting.
  • Washing-machine outlet box with valves and water-hammer arrestors, and an ABS drain, in an open stud wall.
  • New built-in dishwasher unpacked on its protective base, ready to be installed.
  • Frost-free outdoor faucet installed on a stone wall.
  • Red and white PEX supply with capped stub-outs beside a shower base, before the wall is closed.
  • Braided stainless-steel supply connectors, shut-off valves and a chrome P-trap under a fixture.

Frequently asked questions

Do renovation works require a licensed plumber?
In Québec, construction work performed for others must be carried out by a contractor holding a licence from the Régie du bâtiment du Québec (RBQ). Beyond the requirement, the licence protects the client: it governs the contractor’s qualification, and an unlicensed installer can complicate an insurance claim if something goes wrong.
How long does installing a fixture take?
It depends entirely on what is already in place. Replacing a fixture in the same spot, with accessible fittings and an existing shut-off valve, is quick. Relocating a water point means altering supply, drainage and sometimes venting: that is a different job altogether. This is why a quote starts with assessing the actual situation.
Can I supply my own fixtures?
Yes, that is common, especially when the look matters to you. Confirm the model before buying: connection dimensions and outlet positions vary between models, and a fixture that does not suit the existing rough-in can add work that was not planned for.